Tracer Wire – Reid Terra https://www.reidterra.com Sat, 14 Jul 2018 23:13:55 +0000 en-US hourly 1 https://wordpress.org/?v=5.9.3 185428055 PRO-TRACE HF-CCS PE45 https://www.reidterra.com/product/pro-trace-hf-ccs-pe45/ Sat, 14 Jul 2018 22:55:37 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=309

APPLICATIONS & INFORMATION

PRO-TRACE HF-CCS PE45 tracer wire is designed to have the flexibility, memory, and feel of copper.  It also has a 43% higher break-load , minimizing damage during installation and while in service.  This product is best suited for open-trench,  applications.  Equal in signal tracing performance, it simply outperforms copper tracer wire and significantly reduces material costs.

      • Designed for Open-Cut, Plow-In, and Blow-In Applications.
      • Flexibility, Memory, and Feel of Copper.
      • 43% Higher Breakload than Copper.
      • Corrosion Resistant Properties of Copper
      • Tracer Wire Performance Equal to Copper.
      • 45 Mil, High-Density, HMWPE Insulation, and Direct Burial Rated.
      • Significantly Lower in Cost with Great Price Stability.
      • User-Friendly and Virtually No “Recoil”.

STANDARDS & REFERENCES

PRO-TRACE HF-CCS PE45 conductor meets or exceeds all applicable ASTM specifications, and requirements of the National Electrical Code.

 

      • ASTM B910 / B190M: Standard Specification for Annealed Copper-Clad Steel Wire.
      • ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper.
      • ASTM D1248: Standard Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable

TRACER WIRE CONSTRUCTION

PRO-TRACE HF-CCS PE45 is a flexible, copper-clad steel tracer wire. A low carbon steel core, metallurgically bonded with a copper cladding, that is uniform and continuous, creating a bi-metal conductor that acts as one and is corrosion resistant. Special annealing processes are performed during the cladding process giving HF-CCS the flexibility and feel of copper, but 43% higher in strength which means less breaks then copper tracer wire.

PRO-TRACE HF-CCS PE45 uses a thicker, 45 mil, high-density, high molecular weight polyethylene (HDPE) insulation for extra protection. HDPE provides an excellent balance of surface smoothness, processing ease and electrical consistency. HDPE provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.

TABLE 1: CONDUCTOR PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

TABLE 2: INSULATION PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

WEIGHTS, MEASUREMENTS, AND PACKAGING

SPECIFICATION EXAMPLE (FOR SPECIFYING ENGINEERS)

Tracer wire for open-cut installation shall be a 12 AWG solid, PRO-TRACE HF-CCS PE45.  Conductor shall be annealed, 21% IACS, copper-clad steel, utilizing a AISI 1006 low carbon steel core with minimum break load of 282 lbs or 55,000 psi (required to meet break load, flexbility, and ASTM B910).  Conductor shall be extruded with a 45 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HF-CCS PE45 as manufactured by Pro-Line Safety Products.

]]> 309 PRO-TRACE HF-CCS PE30 https://www.reidterra.com/product/pro-trace-hf-ccs-pe30/ Sat, 14 Jul 2018 22:54:57 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=308

APPLICATIONS & INFORMATION

PRO-TRACE HF-CCS PE30 tracer wire is designed to have the flexibility, memory, and feel of copper.  It also has a 43% higher break-load , minimizing damage during installation and while in service.  This product is best suited for open-trench applications.  Equal in signal tracing performance, it simply outperforms copper tracer wire and significantly reduces material costs.

      • Designed for Open-Cut, Plow-In, and Blow-In Applications.
      • Flexibility, Memory, and Feel of Copper.
      • 43% Higher Break Load than Copper.
      • Corrosion Resistant Properties of Copper
      • Tracer Wire Performance Equal to Copper.
      • 30 Mil, High-Density, HMWPE Insulation (HDPE), and Direct Burial Rated.
      • Significantly Lower in Cost with Great Price Stability.
      • User-Friendly and Virtually No “Recoil”.

STANDARDS & REFERENCES

PRO-TRACE HF-CCS PE30 conductor meets or exceeds all applicable ASTM specifications, and requirements of the National Electrical Code.

 

      • ASTM B910 / B190M: Standard Specification for Annealed Copper-Clad Steel Wire.
      • ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper.
      • ASTM D1248: Standard Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable

TRACER WIRE CONSTRUCTION

PRO-TRACE HF-CCS PE30 is a flexible, copper-clad steel tracer wire. A low carbon steel core, metallurgically bonded with a copper cladding, that is uniform and continuous, creating a bi-metal conductor that acts as one and is corrosion resistant. Special annealing processes are performed during the cladding process giving HF-CCS the flexibility and feel of copper, but 43% higher in strength which means less breaks then copper tracer wire.

PRO-TRACE HF-CCS PE30 uses a 30 mil, high-density, high molecular weight polyethylene (HDPE) insulation. HDPE provides an excellent balance of surface smoothness, processing ease and electrical consistency. HDPE provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.

TABLE 1: CONDUCTOR PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

TABLE 2: INSULATION PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

WEIGHTS, MEASUREMENTS, AND PACKAGING

SPECIFICATION EXAMPLE (FOR SPECIFYING ENGINEERS)

Tracer wire for open-cut installation shall be a 12 AWG solid, PRO-TRACE HF-CCS PE30.  Conductor shall be annealed, 21% IACS, copper-clad steel, utilizing a AISI 1006 low carbon steel core with minimum break load of 282 lbs or 55,000 psi (required to meet break load, flexbility, and ASTM B910).  Conductor shall be extruded with a 30 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HF-CCS PE30 as manufactured by Pro-Line Safety Products.

]]> 308 PRO-TRACE HDD-CCS PE45 https://www.reidterra.com/product/pro-trace-hdd-ccs-pe45/ Sat, 14 Jul 2018 22:53:43 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=292
APPLICATIONS & INFORMATION

(NEW & IMPROVED) PRO-TRACE HDD-CCS PE45 tracer wire has almost 7X the break load of copper, which allows 1 wire to be installed in directional boring and pipe bursting applications .  This tracer wire provides the perfect balance between strength, ductility, and brittleness to ensure durability.  When copper tracer wire is used, 2 to 5 wires may be used to obtain the needed strength to prevent breakage. In comparison, using 1 wire of 12, 10, or 8 AWG HDD-CCS is successful and costs substantially less.  Bottom line is PRO-TRACE HDD-CCS tracer wire is superior to copper in strength and durability.  Take a look at some of the advantages.

      • Designed for directional boring or pipe bursting using 1 wire
      • Perfect Balance Between Tensile Strength, Ductility, and Brittleness
      • Has up to 7X (or 700%) the break load of Copper
      • Corrosion Resistant Properties of Copper
      • Tracer Wire Performance Equal to Copper
      • High-Density, HMWPE Insulation, and Direct Burial Rated
      • Significantly Lower in Cost and Great Price Stability
      • Most Durable Tracer Wire on the Market
STANDARDS & REFERENCES
PRO-TRACE HDD-CCS PE45 conductor meets or exceeds all applicable ASTM specifications, and requirements of the National Electrical Code.

 

      • ASTM B910 / B190M: Standard Specification for Annealed Copper-Clad Steel Wire.
      • ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper.
      • ASTM D1248: Standard Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
TRACER WIRE CONSTRUCTION

PRO-TRACE HDD-CCS PE45 is an extra high-strength, copper clad steel tracer wire.  A high carbon steel core, metallurgically bonded with a copper cladding, that is uniform and continuous, creating a bi-metal conductor that acts as one and is corrosion resistant.  The extreme break load allows only 1 conductor to be used in any tracer wire application for directional drilling (boring) or pipe bursting.  It provides the perfect balance between break load, ductility, and decreased brittleness.  It is the best performing tracer wire on the market for mechanical strength.

PRO-TRACE HDD-CCS PE45 uses a thicker, 45 mil, high-density, high molecular weight polyethylene (HDPE) insulation for extra protection in demanding installs. HDPE provides an excellent balance of surface smoothness, processing ease and electrical consistency. HDPE provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.

TABLE 1: CONDUCTOR PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

TABLE 2: INSULATION PROPERTIES (PHYSICAL, MECHANICAL AND ELECTRICAL)

WEIGHTS, MEASUREMENTS, AND PACKAGING

SPECIFICATION EXAMPLE (FOR SPECIFYING ENGINEERS)

Tracer wire for directional boring installation shall be a 14 AWG solid, PRO-TRACE HDD-CCS PE45.  Conductor shall be hard-drawn, 21% IACS, copper-clad steel, utilizing a AISI 1065 high carbon steel core with minimum break load of 855 lbs or 265,000 psi (required to meet break load).  Conductor shall be extruded with a 45 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HDD-CCS PE45 as manufactured by Pro-Line Safety Products.

Tracer wire for directional boring installation shall be a 12 AWG solid, PRO-TRACE HDD-CCS PE45.  Conductor shall be hard-drawn, 21% IACS, copper-clad steel, utilizing a AISI 1055 high carbon steel core with minimum break load of 1,330 lbs or 260,000 psi (required to meet break load).  Conductor shall be extruded with a 45 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HDD-CCS PE45 as manufactured by Pro-Line Safety Products.

Tracer wire for directional boring installation shall be a 10 AWG solid, PRO-TRACE HDD-CCS PE45.  Conductor shall be hard-drawn, 21% IACS, copper-clad steel, utilizing a AISI 1055 high carbon steel core with minimum break load of 1,940 lbs or 238,000 psi (required to meet break load).  Conductor shall be extruded with a 45 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HDD-CCS PE45 as manufactured by Pro-Line Safety Products.

Tracer wire for directional boring installation shall be a 8 AWG solid, PRO-TRACE HDD-CCS PE45.  Conductor shall be hard-drawn, 21% IACS, copper-clad steel, utilizing a AISI 1065 high carbon steel core with minimum break load of 2,785 lbs or 215,000 psi (required to meet break load).  Conductor shall be extruded with a 45 mil, high density, high molecular weight polyethylene (HMW-HDPE) persuant to ASTM D1248.  Tracer wire shall be rated for direct burial use at 30 volts and RoHS compliant.  Tracer wire shall be PRO-TRACE HDD-CCS PE45 as manufactured by Pro-Line Safety Products.

]]> 292 CU TFN & TFFN https://www.reidterra.com/product/cu-tfn-tffn/ Sat, 14 Jul 2018 22:52:39 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=291

APPLICATIONS

TFN or TFFN Tracer Wire is primarily used in low voltage applications up to 600 volts for locating buried gas, water, sewer, electric and telephone lines in comercial, industrial or residential applications. When used as type TFN or TFFN, conductor is suitable for use in dry locations at temperatures not to exceed 90°C. Voltage rating for TFN or TFFN applications is 600 volts.
SPECIFICATIONS
Pro-Line Type TFN or TFFN Tracer Wire meets or exceeds all applicable ASTM specifications, UL Standard 66 and requirements of the National Electrical Code.
CONSTRUCTION

 

Conductor

TFN or TFFN Tracer Wire is composed of a dead soft annealed copper conductor. Copper conductors utilize a UNS C10200 grade copper that is oxygen free and is drawn down from copper rod.

Insulation

The insulation material is a tough heat and moisture resistant polyvinyl chloride (PVC), over which a nylon (polyamide) or UL-Listed equal jacket is applied. Available in black, white, red, blue, green, yellow, brown, orange, and gray.

Print
Insulation print applied to the insulation surface to repeat at a minimum interval of every foot. Ink color will include black ink for yellow, blue, green, red, orange and green insulation, and white ink for black insulation.
WEIGHTS, MEASUREMENTS, AND PACKAGING

RECOMMENDED TRACER WIRE SPECIFICATIONS
Tracer wire shall be UL Listed, Type TFN (or “TFFN”), gasoline and oil resistant, and suitable for operations at 600 volts as specified in the National Electric Code. Conductor size shall be a 16 AWG solid copper conductor (or “16 AWG 26-Strand copper conductor”). Conductor shall be annealed copper, insulated with high-heat and moisture resistant PVC, jacketed with abrasion, moisture, gasoline, and oil resistant nylon or listed equivalent. Tracer wire shall be manufactured on 500’ non-returnable plastic spools. Tracer wire shall be Pro-Line Safety Products Company.
]]> 291 COPPER UF https://www.reidterra.com/product/copper-uf/ Sat, 14 Jul 2018 22:51:25 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=290 APPLICATIONS & INFORMATION
Pro-Line Type CU UF conductors are used for tracer wire applications not exceeding 600 Volts. Tracer wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication, and electrical markets.

When used as Type CU UF, conductor is suitable for use direct burial applications not locations at temperatures not to exceed -20°C or 60°C.

Considered as the premium grade copper tracer wire, it offers the best protection with a thick PVC insulation.

Tracer wire is RoHS Compliant and manufacturered in the USA.
STANDARDS & REFERENCES
Pro-Line Type CU UF conductors meets or exceeds all applicable ASTM specifications, UL Standards 493, Federal Specification A-A-59544, and requirements of the National Electrical Code.

ASTM B-3: Standard Specification for Soft or Annealed Copper Wire
ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper
CONSTRUCTION
Pro-Line Type CU UF copper conductors are annealed copper (soft drawn), insulated with a polyvinyl chloride (PVC) insulation. PVC provides an excellent balance of surface smoothness, processing ease and electrical consistency. PVC provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.

Available in black, blue, green, orange, purple, red, white, and yellow. Some colors standard, some subject to economic order quantity.

WEIGHTS, MEASUREMENTS, AND PACKAGING

CU UF TRACER WIRE (FOR SPECIFYING ENGINEERS)
Tracer wire shall be a (14, 12 or 10 AWG SOLID), Type UF, copper conductor with a polyvinyl chloride (PVC) insulation and rated for 600 volts. Insulation shall be RoHS compliant and utilize virgin grade material. Insulation color shall meet the APWA color code standard for identification of buried utilities. Tracer wire shall be Pro-Line Safety Products or approved equal and made in the USA.

]]> 290 COPPER THHN https://www.reidterra.com/product/copper-thhn/ Sat, 14 Jul 2018 22:50:50 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=289

APPLICATIONS & INFORMATION

  • Pro-Line Type THHN or THWN conductors are used for tracer wire applications not exceeding 600 Volts. Tracer wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication, and electrical markets.
  • When used as Type THHN, conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as Type THWN, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C when exposed to oil or coolant.
  • When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60°C or dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 75°C conductor temperature per NFPA 79). When used as Type AWM, conductor temperatures not to exceed 105°C in dry locations.
  • Tracer wire is RoHS Compliant and manufacturered in the USA.

STANDARDS & REFERENCES

Pro-Line Type THHN or THWN or MTW (also AWM) meets or exceeds all applicable ASTM specifications, UL Standard 83, UL Standard 1063 (MTW), Federal Specification A-A-59544, and requirements of the National Electrical Code.

CONSTRUCTION

  • Pro-Line Type THHN or THWN or MTW copper conductors are annealed copper (soft drawn), insulated with a tough heat and moisture resistant polyvinyl chloride (PVC), over which a nylon (polyamide) jacket is applied.
  • Available in black, blue, brown, gray, green, orange, pink, purple, red, white, and yellow. Some colors standard, some subject to economic order quantity.

WEIGHTS, MEASUREMENTS, AND PACKAGING

CU THHN TRACER WIRE (FOR SPECIFYING ENGINEERS)

Tracer wire shall be a (14, 12 or 10 AWG SOLID THHN) copper conductor with a polyvinyl chloride (PVC) insulation, over which a nylon (polyamide) jacket is applied and rated for 600 volts. Insulation and jacket shall be RoHS compliant and utilize virgin grade material. Insulation color shall meet the APWA color code standard for identification of buried utilities. Tracer wire shall be Pro-Line Safety Products or approved equal and made in the USA

]]> 289 COPPER PE45 https://www.reidterra.com/product/copper-pe45/ Sat, 14 Jul 2018 22:49:03 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=293

APPLICATIONS & INFORMATION

  • Pro-Line Type CU HDPE 45 MIL conductors are used for tracer wire applications not exceeding 600 Volts. Tracer wire is used to conductively locate buried utility lines for the gas, water, sewer, telecommunication, and electrical markets.
  • When used as Type CU HDPE 45 MIL, conductor is suitable for use direct burial applications not locations at temperatures not to exceed 75°C.
  • Tracer wire is RoHS Compliant and manufacturered in the USA.

STANDARDS & REFERENCES

Pro-Line Type CU HDPE 45 MIL conductors meets or exceeds all applicable ASTM specifications, requirements of the National Electrical Code.

  • ASTM B-3: Standard Specification for Soft or Annealed Copper Wire
  • ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper
  • ASTM D1248: Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • ASTM D1238: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

CONSTRUCTION

  • Pro-Line Type CU HDPE 45 MIL copper conductors are annealed copper (soft drawn), insulated with a high-density, high molecular weight polyethylene (HDPE) insulation. HDPE provides an excellent balance of surface smoothness, processing ease and electrical consistency. HDPE provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.
  • Available in black, blue, green, orange, purple, red, white, and yellow. Some colors standard, some subject to economic order quantity.
WEIGHTS, MEASUREMENTS, AND PACKAGING

CU HDPE 45 MIL TRACER WIRE (FOR SPECIFYING ENGINEERS)

Tracer wire shall be a (14, 12 or 10 AWG SOLID HDPE 45 MIL) copper conductor with a 45 mil thick, high-density, high molecular weight polyethylene (HDPE) insulation and rated for 600 volts. Insulation and jacket shall be RoHS compliant and utilize virgin grade material. Insulation color shall meet the APWA color code standard for identification of buried utilities. Tracer wire shall be Pro-Line Safety Products or approved equal and made in the USA.

]]> 293 COPPER PE30 https://www.reidterra.com/product/288/ Sat, 14 Jul 2018 22:44:19 +0000 https://reidterra.ryanjponto.com/?post_type=product&p=288

APPLICATIONS & INFORMATION

Pro-Line Type CU HDPE 30 MIL is a solid, copper tracer wire designed for applications not exceeding 30 volts.  Tracer wire is used to conductively located buried utility lines for the gas, water, sewer, telecom and electrical markets.   This wire may also be used for underground pet fence systems. 

      • 100% Copper Conductor.
      • Corrosion Resistant
      • 30 Mil, High-Density, HMWPE Insulation, and Direct Burial Rated.
      • RoHS Compliant, Direct Burial Rated, 30 Volts.
      • Moisture, Chemical, and Oil Resistant
      • Impact, Crush, and Abrasion Resistant
      • User-Friendly and Flexible with No “Recoil”.
      • Made in the USA

STANDARDS & REFERENCES

Pro-Line Type CU HDPE 30 MIL conductors meets or exceeds all applicable ASTM specifications, requirements of the National Electrical Code.

  • ASTM B-3: Standard Specification for Soft or Annealed Copper Wire
  • ASTM B170: Standard Specification for Oxygen-Free Electrolytic Copper
  • ASTM D1248: Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • ASTM D1238: Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

CONSTRUCTION

  • Pro-Line Type CU HDPE 30 MIL copper conductors are annealed copper (soft drawn), insulated with a high-density, high molecular weight polyethylene (HDPE) insulation. HDPE provides an excellent balance of surface smoothness, processing ease and electrical consistency. HDPE provides superior strength against underground elements that help prevent accidental breaks caused buy rocks in shifting soil conditions.
  • Available in black, blue, green, orange, purple, red, white, and yellow. Some colors standard, some subject to economic order quantity.
WEIGHTS, MEASUREMENTS, AND PACKAGING

CU HDPE 30 MIL TRACER WIRE (FOR SPECIFYING ENGINEERS)

Tracer wire shall be a (14, 12 or 10 AWG SOLID HDPE 30 MIL) copper conductor with a 30 mil thick, high-density, high molecular weight polyethylene (HDPE) insulation and rated for 30 volts. Insulation and jacket shall be RoHS compliant and utilize virgin grade material. Insulation color shall meet the APWA color code standard for identification of buried utilities. Tracer wire shall be Pro-Line Safety Products or approved equal and made in the USA.

]]> 288