Control & Power Cable – Reid Terra

XHHW / PVC POWER CABLE

administrator — Sun, 15 Jul 2018 17:39:45 +0000

600 Volts
Copper Conductors
XLP Insulated Singles Rated XHHW (or XLPTC)
Non-Shielded Tray Cable
Available in 3 or 4 Conductors with Ground
Overall PVC Jacket
Flame Retardant, Moisture and Sunlight-Resistant

APPLICATIONS

Pro-Line’s Type TC Power Cable is used to supply power to motors, or for connection to other power devices in industrial settings
Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire
Type TC Power Cable is listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits
This cable may be used in wet or dry locations at temperatures not to exceed 90°C. 6 and 8 AWG constructions with insulated grounds (standard) and 4 AWG and larger with bare or insulated ground are UL Listed for exposed runs (ER) per NEC 336.10

STANDARDS AND REFERENCES

Pro-Line’s Type TC Power Cable meets or exceeds the applicable requirements of the

following standards and specifications:

ASTM – (All applicable standards)
UL 1277 – Electrical Power and Control Tray Cables
UL 1581 – Electrical Wires, Cables and Flexible Cords
ICEA S-58-679 – Control Cable Conductor Identification. (Method 4 – single color (black) compounds with surface printing of numbers)

UL 1685 – UL Flame Exposure Test (70,000 BTU/hr)
ICEA T-29-520 – Vertical Cable Tray Flame Test (210,000 Btu/hr)
IEEE 1202 – Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies (70,000 BTU/hr)

Pro-Line’s Type TC Power Cable meets and exceeds all construction requirements of ICEA S-95-658 (NEMA WC 70) – Nonshielded 0 – 2 kV Cables, with testing frequencies based on UL requirements.

CONSTRUCTION

Pro-Line’s Type TC Power Cable is available in sizes 8 AWG through 750 kcmil and is manufactured using Type XHHW-2 conductors. Individual conductors are bare annealed copper covered with a cross-linked polyethylene (XLP) insulation. The overall jacket consists of a flame retardant, moisture and sunlight resistant PVC jacket. TC Power Cable shall be PRO-LINE WIRE & CABLE or approved equal.

Sizes 8 thru 2 AWG: Concentric, compressed or compact stranding, class B (7 strands) per ASTM B-8
Sizes 1 thru 4/0 AWG: Concentric, compressed or compact stranding, class B (19 strands) per ASTM B-8
Sizes 250 thru 500 KCMIL: Concentric, compressed or compact stranding, class B (37 strands) per ASTM B-8
Size 750 KCMIL: Concentric, compressed or compact stranding, class B (61 strands) per ASTM B-8

WEIGHTS, MEASUREMENTS AND PACKAGING

XHHW / PVC CONTROL CABLE

administrator — Sun, 15 Jul 2018 17:38:05 +0000

600 Volts
Copper Conductors
FR-XLP Insulated Singles Type XHHW
Rated VW-1
Overall PVC Jacket
Heat, Moisture and Sunlight-Resistant

APPLICATIONS

Pro-Line’s Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired
Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire
Type TC Control Cable is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits
Conductors may be used in wet or dry locations at temperatures not to exceed 90°C

STANDARDS AND REFERENCES

Pro-Line’s Type TC Control Cable meets or exceeds the applicable requirements of the

following standards and specifications:

ASTM – (All applicable standards)
UL 1277 – Electrical Power and Control Tray Cables
UL 1581 – Electrical Wires, Cables and Flexible Cords
ICEA S-58-679 – Control Cable Conductor Identification. (Method 1, Table 2 – colored compounds with tracer colors – excluding white and green)
UL 1685 – UL Flame Exposure Test (70,000 BTU/hr)
ICEA T-29-520 – Vertical Cable Tray Flame Test (210,000 BTU/hr)
IEEE 1202 – Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies (70,000 BTU/hr)

Type TC Control Cable meets and exceeds all construction requirements of ICEA S-95-658 (NEMA WC 70) – Nonshielded 0 – 2kV Cables, with testing frequencies based on UL requirements.

CONSTRUCTION

Pro-Line’s Type TC Control Cable is available in sizes 14 AWG through 10 AWG, with multi-conductor constructions of 2 through 37 conductors. The product uses Type XHHW-2 rated VW-1conductors. Individual conductors are bare annealed copper covered with a cross-linked polyethylene (XLP). The overall jacket consists of a flame retardant, moisture, and sunlight-resistant PVC. TC Control Cable shall be PRO-LINE WIRE & CABLE or approved equal.

WEIGHTS, MEASUREMENTS AND PACKAGING

THHN / PVC POWER CABLE

administrator — Sun, 15 Jul 2018 17:36:20 +0000

600 Volts
Copper Conductors
PVC/Nylon Insulated Singles Rated THHN (or VNTC)
Non-Shielded Tray Cable
Available in 3 or 4 Conductors with Ground
Overall PVC Jacket
Flame Retardant, Moisture and Sunlight-Resistant

APPLICATIONS

Pro-Line’s Type TC Power Cable is used to supply power to motors, or for connection to other power devices in industrial settings
Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire
Type TC Power Cable is listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits
This cable may be used at temperatures not to exceed 75°C in wet locations and 90°C in dry locations. 6 and 8 AWG constructions with insulated grounds (standard) and 4 AWG and larger with bare or insulated ground are UL Listed for exposed runs (ER) per NEC 336.10

STANDARDS AND REFERENCES

Pro-Line’s Type TC Power Cable meets or exceeds the applicable requirements of the

following standards and specifications:

ASTM – (All applicable standards)
UL 1277 – Electrical Power and Control Tray Cables
UL 1581 – Electrical Wires, Cables and Flexible Cords
ICEA S-58-679 – Control Cable Conductor Identification. (Method 1, Table 2 – colored compounds with tracer colors – excluding white and green)
UL 1685 – UL Flame Exposure Test (70,000 BTU/hr)
ICEA T-30-250 – Vertical Cable Tray Flame Test (70,000 BTU/hr)
ICEA T-29-520 – Vertical Cable Tray Flame Test (210,000 BTU/hr)
IEEE 1202 – Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies (70,000 BTU/hr)

CONSTRUCTION

Pro-Line’s Type TC Power Cable is available in sizes 8 AWG through 750 kcmil and is manufactured using Type THHN or THWN conductors. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a flame retardant, moisture and sunlight resistant PVC jacket. TC Power Cable shall be PRO-LINE WIRE & CABLE or approved equal.

Sizes 8 thru 2 AWG: Concentric, compressed or compact stranding, class B (7 strands) per ASTM B-8 or 19 wire combination stranding per ASTM B-787
Sizes 1 thru 4/0 AWG: Concentric, compressed or compact stranding, class B (19 strands) per ASTM B-8 or 19 wire combination stranding per ASTM B-787
Sizes 250 thru 500 KCMIL: Concentric, compressed or compact stranding, class B (37 strands) per ASTM B-8
Size 750 KCMIL: Concentric, compressed or compact stranding, class B (61 strands) per ASTM B-8

WEIGHTS, MEASUREMENTS AND PACKAGING

THHN / PVC CONTROL CABLE

administrator — Sun, 15 Jul 2018 17:34:05 +0000

600 Volts
Copper Conductors
PVC / Nylon Insulated Singles Type THHN
Sizes 16 Through 10 AWG
Overall PVC Jacket
Heat, Moisture and Sunlight-Resistant

APPLICATIONS

Pro-Line’s Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired
Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire
Type TC is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits
Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations

STANDARDS AND REFERENCES

Pro-Line’s Type TC Control Cable meets or exceeds the applicable requirements of the following standards and specifications:

ASTM – (All applicable standards)
UL 1277 – Electrical Power and Control Tray Cables
UL 1581 – Electrical Wires, Cables and Flexible Cords
ICEA S-58-679 – Control Cable Conductor Identification. (Method 1, Table 2 – colored compounds with tracer colors – excluding white and green)
UL 1685 – UL Flame Exposure Test (70,000 BTU/hr)
ICEA T-30-250 – Vertical Cable Tray Flame Test (70,000 BTU/hr)
ICEA T-29-520 – Vertical Cable Tray Flame Test (210,000 BTU/hr)
IEEE 1202 – Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies (70,000 BTU/hr)

CONSTRUCTION

Pro-Line’s Type TC Control Cable is available in sizes 16 AWG through 10 AWG, with multi-conductor constructions of 2 through 37 conductors. The product uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a heat, moisture and sunlight-resistant PVC. TC Control Cable shall be PRO-LINE WIRE & CABLE or approved equal.